Shenzhen Fama Intelligent Equipment Co., Ltd production
Home > Products > Intelligent Traffic Controller > 44 outputs Networking Intelligent Traffic Signal Controller

44 outputs Networking Intelligent Traffic Signal Controller

Brand : Fama/Chevy

Product origin : China

Delivery time : 5-15 Days

Supply capacity : 5000 Set/Month

      Details

  Model:FM10C-AN TYPE01

  Housing Material:Alloy steel

  Working Voltage:24VDC; 85-265VAC 50HZ/60HZ

  Temperature:-40℃~+80℃

  LED QTY:

  Certifications:GB25280-2010,CE(LVD,EMC),IP55


  Product Function and Technical Feature:

  44 outputs Networking Intelligent Traffic Signal Controller uesd 2*48 work periods for workday and holiday setting;

  Easy for maintenance and function extension by modular design;

  Input AC110V and AC220V, Can be changed by the switch; Yellow flashing or close the signal can be setup at night;

  32 working menus used for any period(among 1~30 numbers customs can set it by themselves);

  The flashing state, frequency and time of each green signal light can be setup or adjusted;

  44 outputs Networking Intelligent Traffic Signal Controller Can modify the current pace of running time in the running state immediately;

  44 outputs Networking Intelligent Traffic Signal Controller has Full red, yellow flashing, step by step manual,jump in the manual,remote manual function(optional);

  Be equipped with the hardware fault testing function(Red Light fails,Green lights up test),down grade to Yellow flash status and cut down the Red&Green light power supply when the fault happens.(Optional)

  Each output all the way with independent lightning protection circuit;

  The setup software of 44 outputs Networking Intelligent Traffic Signal Controller can operation on the computer offline,Project data can be stored on the computer and can be copied。

Technical Parameters:

Items

Technical Parameters

Executive Standard

GB25280-2010

Working Voltage

AC110V/220V±20% (changed by switch)

Working Frequency

47Hz~63Hz

No-load power

≤15W

The whole controller rated load power

2200W

Motor operation sequencespecial timing state should be statement before production

all Red(can setup) →green light→green flash can setup) →yellow light→Red light

Pedestrian signal operation sequence

all Red(can setup) →green light→Green flash(can setup)→Red light

Rated drive current in each way

3A

surge current in each way

≥100A

The largest output channel independently

44

The largest output way independently

16

working menus

32

Can be setup menus number

30

The largest number of each meus

24

The largest number of timers in each day

48

Running time in each step

1255

Full red transition time

05S

Yellow light transition time

1~9S

Green flashing time

0~9S

OperationalTemperatureRange

-40~+80

Relative Humidity

<95%

Setting Plan Saving Time(the electricity was turned off)

10 years

Time Error

Error/year<2.5 minutes (25±1)

Inner Cabinet Dimension

472.6*215.3*280mm  

Outer Cabinet Dimension

1250*630*500mm 


  Setup Instruction

  Date Setting

  Press Function button to make the date button is light,the digital tube will display the current date,press the Plus and Minus, the cursor will be moved to the digital which you want to modify. Press SAVE to save the plane after the completion of the modified,if press Exist, the exist the current setting cannot be saved.

  Press Function, we will move to next stage-TimeSet:

  Time Setting:

  Press Function to time set,when the indicator light is lighting, the digital tube will display the current time(Hour,minute,second,day of the week),

  Press the Plus and Minus to change the flashing digital,Press SAVE to save the plane after the completion of the modified,if press Exist, the exist the current setting cannot be saved.

  44 outputs Networking Intelligent Traffic Signal Controller can be moved to next set—Flash set/ Transition state

 parameter Settings:

  Transition state parameter Settings

  Press Function enters into the transition state parameter Settings,here we can be set up the green flashing time,the transition time of full red and yellow.,after the indicator lamp lights up,The digital tube will display the current flash time,press the Plus and Minus to modify the flashing time,Press SAVE to save the plane after the completion of the modified,if press Exist, the exist the current setting cannot be saved.

  Press Function can be moved to next set—workday plan setting:

  Note of 44 outputs Networking Intelligent Traffic Signal Controller:we cab setupt the right simulation intersection to finish this stage.

  direction stands for direction,Left and Right can be used to choose the light,Yes means ok, No means this light will be not setup this function:

  Weekday scheme settings

  Press Function button to enter the weekday scheme settings, The running time scheme can be setted from every Monday to Friday ! ( it can be setted up to 48 programs every day ), after the indicator lighten, The digits tube will display the current flashing time. We can modify the flashing digital through the Plus and Minus button, and press the left and right button can move the cursor to modify the digital. Note : we can’t modify the setting time at the first period time, when the time was setted to 24:00, that means the period time has been finished. After modification, , press the save button to save it. If you press the Exist button of 44 outputs Networking Intelligent Traffic Signal Controller to exit current settings (non-preservation), Press the function key to enter the next state of holidays cheme settings.

 Setup Menu

  Press the Funciton button to enter the menu program settings, the digits tube will be displays the digital presentation from left to right. Menu number ( we can set up to 30 sets programs at most). Step (setted up to 24 steps at most), and the current steps duration, when setting up this items, we can set up the green light for performed requirements as per the right side of simulated intersection, Direction, left and right are choose to the corresponding light, Yes means selected the light, By setting the current time step continuously, which can be setted the running time for traffic signal light, after finished that, press save key to enter the next step settings by automaticly, the same setting methods as above, and so on. When the steps time is set up to 0, press save key, and the current menu will be automatic end, then it will be back to the current operating state.

  After changed the menu of 44 outputs Networking Intelligent Traffic Signal Controller, we can modify the other menu, Pls kindly see the notes as below,

  1, If the traffic signal light have conflict on release, such as green conflict /yellow flashing lights at this time, which can’t be saved, you need to choose the release traffic signal light again .

  2, The total of menu number is 32 , you can set up it by yourself from 1-30, and the number of 31 is fixed yellow flashing time, the Number of 32 menu means the off menu, while the number 31 and number 32 menu can be exchanged between weekday scheme settings and holidays scheme settings.

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Subject :
* Email :
  • Name :

  • Phone :

  • Company :
    *Message :
    Message